AX 230 1-C flex sealing compound
The High-Tec 1-component flex sealing slurry codex AX 230 is a flexible composite waterproofing for surfaces that are particularly exposed to moisture and wetness.
Anwendungsbereiche
- For load class A0, B0 as well as A and B according to the ZDB bulletin
- For water impact classes W0-I, W1-I, W2-I, W3-I according to DIN 18534
- For water impact classes W1-B and W2-B according to DIN 18535
- For sealing balconies, loggias and walkways according to DIN 18531-5
- Meets the requirements CM 01P according to EN 14891
- For balconies and patios with a slope > 1.5%
- For showers, baths and toilets
- For swimming pools and their surrounding area
- For saunas and therapy basins
- For domestic and commercial areas
- For retirement homes and hotels
- For interior and exterior use
- On calcium sulphate and cementitious screeds, concrete
- On gypsum, lime cement and cement plaster
- On gypsum carton and gypsum board plates, tile carrier elements
- On underfloor heating, on walls and floors
Produktvorteile / Eigenschaften
- Reinforced with fibres - thus increased stability even on the wall
- Very high pressure water tightness, suitable for water depths up to 8 m
- Resistant to frost and ageing
- Smooth and easy to process - low consumption, therefore very economical
- Easy to measure out, partial quantities also possible
- Quick drying, ready for foot traffic already after approx. 4 hours
- Quick drying even at cooler temperatures
- Flexible and crack-bridging
- Water vapour diffusion
- Waterproof
- Ideal matching with codex sealing accessories
- With general test certificate by building authorities
- Highest quality level 4 according to DGNB criterion ENV 1.2 Risks for the local environment
- EMICODE EC1 PLUS / very low-emission
- For healthy construction
The new 1-component high-tech sealing compound codex AX 230 dries quickly and reliably, even at low temperatures, thanks to a new combination of raw materials. The additional use of special microfibres supports the elasticity and crack-bridging properties and ensures optimum application properties on walls and floors, indoors and outdoors.
Downloads
Technische Daten
| Pack type | paper bag |
|---|---|
| Pack size | 15 kg |
| Shelf life | 6 months |
| Color | brown-grey |
| Ideal working temperatures | + 5 up to + 25 °C |
| Water quantity required | 3.75 - 4.5 litres/ 15 kg |
| Working Time/ Pot Life | approx. 1 hour* |
| Minimum dry coat thickness | 2 mm |
| Drying time 1st coat | approx. 2 hours* |
| Drying time 2nd coat | approx. 2 hours* |
| Set to foot traffic | after approx. 4 hours* |
| Ready for covering | after approx. 4 hours* |
| Consumption | 2.2 - 2.5 kg/m² |
Bestell-Informationen
Gütesiegel & Kennzeichen
